Logitech’s CollabOS version 1.11 marks a significant enhancement in collaboration capabilities by introducing support for Nureva® audio conferencing systems in Microsoft® Teams Rooms mode. Previously this support for Nureva systems was limited to Zoom Rooms mode.
Supported Nureva products
- HDL200 system
- HDL300 system
- Dual HDL300 system
- HDL310 system
- HDL410 system
Before proceeding, set up your Nureva device by following the steps in the applicable support article:
- HDL200 - Getting started
- HDL300 and Dual HDL300 - Getting started
- HDL310 - Getting started
- HDL410 - Getting started
On the Logitech Rally Bar
- Connect the USB cable from the Nureva device to any USB-A port on the Logitech Rally Bar Mini
- Connect an HDMI cable from the HDMI-out port of the Rally Bar Mini to the in-room display
- In the Logitech Settings page
- Go to Display and Audio
- Advance to Audio
- Select External Audio
Zoom Rooms
When using Zoom Rooms, go to the Zoom Settings page and ensure the speaker and microphone are set to Nureva Audio
Microsoft Teams Rooms
When using Microsoft Teams Rooms, the microphone and speaker settings will automatically default to Nureva Audio once a Nureva system is connected.
Good to know
Bring-your-own-devices
BYOD mode for the Logitech Rally Bar Mini does not support external audio or video devices at this time.
Logitech Sight cameras
If a Logitech Sight is connected to the Rally Bar Mini the cameras in the Sight will be disabled when External Audio is enabled. However, the main camera in the Rally Bar Mini will continue to function.
Nureva audio system mute
When in an audio or video conference, you can control the audio volume or mute from the Nureva remote, the Rally Bar Mini, or a Logitech Tap touch controller.