CV30 camera remote control functions
Remote control codes
The CV30 camera's remote control uses an infrared transmission protocol. If an infrared (IR) blaster (transmitter) is used to control the camera, then the following codes can be programmed.
Function | Code | Function | Code |
Mute |
48 77 1F E0 | Menu (enter/exit OSD) | 08 F7 17 E8 |
Volume down ( - ) |
48 77 1C E3 | Enable/disable tracking | 08 F7 13 EC |
Volume up ( + ) | 48 77 07 F8 | Set | 08 F7 48 B7 |
Up | 08 F7 50 AF | Num 1 | 08 F7 0F F0 |
Down | 08 F7 53 AC | Num 2 | 08 F7 49 B6 |
Left | 08 F7 51 AE | Num 3 | 08 F7 1A E5 |
Right | 08 F7 52 AD | Zoom in | 08 F7 4A B5 |
Home | 08 F7 1C E3 | Zoom out | 08 F7 54 AB |
Troubleshooting
If the remote control is not operating correctly, try the following:
- Point the remote at the center of the camera lens, at a 90-degree angle
- Move closer to the CV30 (optimum range is within 20 feet)
- Confirm that the front of the remote is not obstructed
- Confirm that the path between the remote control and camera are not blocked
- Replace the batteries