HDL410 system technical requirements

The operating system and driver requirements
Last Updated: November 22nd, 2023

Operating systems

The HDL410 system and firmware are tested with the following operating systems.


  Windows®

  macOS®


  • Windows 10
  • Windows 11

  • macOS Ventura
  • macOS Monterey

The HDL410 system will also work with many other operating systems that will allow for standard HID/audio class USB operation. Some examples are shown below. Please note that the HDL300 and Dual HDL300 systems are not tested with these operating systems.


Windows 
OS X
  macOS


  • Windows 7
  • Windows 8.1
  • OS X Yosemite
  • OS X El Capitan
  • macOS Big Sur
  • macOS Catalina
  • macOS Mojave

macOS

Apple® advises using Rosetta® 2 with Mac® computers that have Apple silicon. Rosetta 2 enables a Mac computer with Apple silicon to use apps originally built to support Mac computers that use Intel processors. Rosetta 2 may not be pre-installed on some Mac computers and must be installed before using Nureva Console client.

Driver requirements

The HDL410 system is plug and play and will work as a standard USB device without requiring special drivers or software. The HDL410 system presents itself as both an audio input (recording) and audio output (playback) device to the operating system, so custom drivers are not required. Each device will present itself specifically as a USB composite device (HID device and audio class). 

Keep in mind, that these requirements are for a typical installation. The HDL410 will also work with other systems, including computerless systems.

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111