Is the HDL300 system compatible with Quicklaunch™ 4.0 meeting room interface?

Nureva® Console client
Last Updated: August 16th, 2021

Yes, the HDL300 works with Quicklaunch™ 4.0 meeting room interface.

To get started, first check that the HDL300 system is up-to-date and set up correctly: 

On the Connect module

  • Connect the PoE cable (provided) to the RJ45-1 port on the connect module to the rear port on the HDL300 system.
  • Connect the in-room NUC or PC driving the flat-panel display to the connect module using the USB-A to USB-B cable (provided)
  • Plug in the 54VDC power supply to the connect module


On the PC (connected to the flat-panel display)

  • Open a browser 
  • Download and run Nureva Console client
    • Complete the setup of your HDL300 by following the on-screen instructions
    • Choose System information
      • select Check for firmware update
      • Install available updates

Quicklaunch

  • Register, download and install your appropriate subscription via the Quicklaunch webstore 
  • Choose the Quicklaunch Settings gear icon on the right-hand menu bar 

  • From return to the Quicklaunch Home screen,  select the A/V icon on the right-hand menu bar

  • Adjust the HDL audio controls for Volume +/- and Mute as needed

 

You can now control the HDL from your PC display, without the need for the Nureva remote control. 

Note: The HDL is also set as the default audio device for all UC&C or media-related audio.

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111