Nureva has developed and released a control module for the HDL 200, HDL300 and Dual HDL300 audio conferencing systems. This driver is a Creston 3 and 4-series SIMPL# module and is available from the Crestron Application Marketplace.
What functions are available through the module?
The control module allows users to control Nureva devices that are connected to a Crestron series 3 or series 4 controller. Depending on your Nureva audio conferencing system, the following functions are available:
Available function |
HDL200 | HDL300 | Dual HDL300 |
Enable/disable active zone |
 |
 |
|
Set full/partial zone |
 |
 |
|
Microphone mute/unmute |
 |
 |
 |
Volume up/down |
 |
 |
 |
Recalibration |
 |
 |
 |
Firmware update |
 |
 |
 |
Before downloading the module
Nureva cloud API access is granted through registering an OAuth Service app within the Nureva developer toolkit. The Nureva devices need to be updated to the latest version of the firmware. The following steps must be completed before downloading the module:
- Create an account and enroll their devices into Nureva Console cloud
- Review information about setting up an account and enrolling devices
- Update their Nureva audio conferencing systems to the latest firmware version
- Register an OAuth Service app in the Nureva application portal
- Review information about registering an OAuth Service app
Downloading the control module
Once Nureva API access has been established, the Creston module can be downloaded and installed.