How often should I change the projector dust filter?

We recommend cleaning the filter annually. If your filter appears to be acquiring an excess of dust in between cleanings, we recommend cleaning the filter semi-annually or after 1000 hours. New filters can be ordered via orders@nureva.com using the service SKU - SRV-FILTER and part number - 100122.

 
Set a filters reminder

  1. Press the On Screen Menu (OSD) button on the projector remote control
  2. Use the arrow buttons to navigate to Options
  3. Select Filters Remind (Hour) to set when you would like to be reminded to change the filter  


 Clean the dust filter

  1. Turn the projector off and unplug the power cord
  2. Pull the dust filter container out from the projector
  3. Carefully remove the dust filter from the dust filter container
  4. Either clean the filter, or replace it with a new filter
  5. Put the dust filter container back inside the projector and press the power button to turn the projector on  



Reset the reminder after cleaning

  1. Press the OSD button on the projector remote control
  2. Use the arrow buttons to navigate to Options
  3. Select Cleaning up Remind and Yes to reset the reminder after replacing or cleaning the filter


For more information about your projector, see the Projector user manual




Last updated: February 20, 2017

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111