Once the Nureva Wall hardware has been installed it is important to adjust the projector image brightness and color correction to match the projected images of dual or triple systems. The steps in this article will help to match the color and brightness of the projected images as close as possible.

Download the color correction bar image file.

1. 1Projector settings
2. 2Color management settings
3. 3Graphics card settings
4. 4Room lighting

● ● ● ●

Projector settings

Color management settings

Graphics card settings

Room lighting

● ● ● ●

Projector settings

Color management settings

Graphics card settings

Room lighting

Color corrections

Follow these steps to color match your projectors:

Fix	Tool	Steps	Example
A	Projector settings Inside the projector menu	Download and open the color correction bar Open the .png across both projected images Use the projector Picture settings to make adjustments Color Mode (default "Blending") • Color Temp • Hue • Saturation Open a white notepad across both projectors Use the projector Picture settings to make adjustments to match the white Gamma • Color Temp • Wall Color See the projector user manual for further details.
B	Color management Built into Microsoft® Windows®	On your computer, go to Control panel → Color management Open the Advanced tab Select Calibrate display Follow the steps in the on-screen wizard
C	Video card settings	Find the color and brightness options inside the manufacturer's video card settings. Configure each output individually.
D	Change room lighting	If the brightness can't be improved enough with steps A to C, consider removing lights from the room.

Last updated: January 5, 2018