How to clean and disinfect your Nureva® audio conferencing system

HDL200, HDL300, Dual HDL300 systems
Last Updated: August 6th, 2021

Cleaning materials

  • A soft-fiber, lint-free cloth
  • A solution made of 70% isopropyl alcohol
  • Cleaning wipes with a minimum alcohol concentration of 70%

Guidelines - audio system

  1. Before starting, power off the audio system by disconnecting the power cable
  2. Spray the cleaning solution onto the soft-fiber cloth until it is damp
  3. Start by test cleaning in a small, inconspicuous area to ensure that the cleaner does not damage the surface
  4. Gently wipe the exterior, non-porous surfaces using the soft-fiber cloth
  5. Gently wipe cables using the cleaning wipes
  6. Wait for the system and cables to be dry before connecting the power cable and powering the system

Important

  • Be careful when cleaning near fabric-covered areas
  • Avoid getting liquid onto fabric-covered areas
  • Do not spray the cleaning solution directly onto the audio system
  • Do not use any solvents, harsh chemicals, ammonia cleaners, or abrasive cleaners
  • Keep moisture to a minimum and avoid spilling or dripping liquid into any openings
  • Cleaning the system more than 5 times per day may damage the surface

HDL200 systems

  • Be careful when cleaning the LCD screen as it may scratch easily

HDL300 systems

  • Early production units were coated with a softer paint that may rub off or discolor slightly
  • HDL300 systems with serial numbers starting with "AG" ( AGxxxXxxXxxxxx) have the softer coating
  • Start with a small, inconspicuous area to ensure that the cleaner does not cause the paint to rub off or discolor 

Guidelines - remote control

  1. Remove the batteries from the remote control before starting
  2. Spray the cleaning solution onto the cloth until it is damp
  3. Gently wipe the remote control surfaces, including the buttons
  4. Allow the remote control to air dry completely before replacing the batteries
  5. Start by test cleaning in a small, inconspicuous area to ensure that the cleaner does not damage the surface

Important

  • Keep moisture to a minimum and avoid spilling liquid on the remote control
  • Avoid using excessive force when cleaning the remote control buttons
  • Cleaning the remote control more than 5 times per day may cause damage

Warning

Using germicidal disinfectant wipes to clean and disinfect the audio system surfaces may cause visible and/or functional damage after repeated use.

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111